This kit provides stable and high-speed 4G LTE Internet even in remote locations. It consists of a powerful ENERGY MIMO panel antenna with 2x15 dB gain, two Mobile Guard RG-58 50 Ohm coaxial cables of 10 meters each with already connected F-connectors on both ends, as well as two F to SMA adapters for connection to a 4G router.
Power and Compatibility:
3G/4G LTE ENERGY MIMO panel antenna is designed for signal amplification in 3G, 4G and 4.5G networks. The 2 x 15 dB antenna gain provides operation in the 1700 - 2700 MHz frequency range, which allows users to enjoy high-speed Internet even in remote locations. The antenna is fully compatible with 3G/4G frequencies of Ukrainian operators (Kyivstar, Vodafone and Lifecell). It supports operation in 3G/4G LTE networks at a maximum data transfer rate of up to 64 Mbit/s using HSPA/HSPA+/DC-HSPA+ technology and up to 600 Mbit/s using 4G LTE technology. The working distance to the nearest tower of the communication operator is up to 20 km.
Design and equipment:
The antenna is made in the "Panel" format, which contributes to effective work at long distances with indirect visibility. Dimensions: 230 x 230 x 40 mm. The design of the antenna is a hermetic housing made of high-quality plastic. The antenna can be used with vertical and horizontal polarization. The antenna is attached to the mast with a steel clamp included in the kit.
Mobile Guard coaxial cable:
Two 10 meter RG-58 50 ohm cables with F-connectors on both ends ensure a reliable connection and minimal signal loss. The cables are flexible and strong, which allows easy installation even in difficult conditions.
F to SMA adapters:
Two F to SMA adapters allow you to easily connect the antenna cables to the 4G router, ensuring a reliable connection and stable network operation.
Installation:
Antenna connection:
- Install the antenna on the roof or on the gable of the house, aimed at the nearest operator tower.
- Using the included mounts, secure the antenna to a mast or wall.
Connecting cables:
- Connect one end of each coaxial cable to the antenna using F-connectors.
- Pull the cables to the location of the router.
Connecting to the router:
- Connect the F to SMA adapters to the other end of the coax cables.
- Connect the SMA adapters to the corresponding ports on the 4G router.
Antenna settings:
- Turn on the router and go to its WEB interface to check the signal level.
- Slowly change the direction of the antenna, focusing on the maximum signal level in the web interface of the router.
- After reaching the optimal signal level, fix the antenna permanently.
Use:
After setting up the antenna and connecting to the router, you can enjoy stable and high-speed Internet. This set provides a high data transfer rate, which allows you to use video communication with high image quality, watch movies and series in Full HD quality, and use the Internet for work, study and entertainment.