4G MIMO Panel Antenna Kit 2×24 dBi 1700–2700 MHz with Mobile Guard 50 Ohm Cable and CRC9 Adapter

This kit provides stable and high-speed 4G LTE internet access even in remote areas. It includes a powerful 2×24 dBi MIMO panel antenna, two Mobile Guard RG-58 50 Ohm coaxial cables (15 meters each) with pre-installed F-connectors on both ends, and two F to CRC9 adapters for connecting to a 4G router.

Performance and Compatibility

The MIMO panel antenna is designed to boost signal in 3G, 4G, and 4.5G networks.
With a high gain of 2×24 dBi, it operates in the 1700–2700 MHz frequency range, allowing users to enjoy fast and stable internet access even far from the nearest base station.

The antenna is fully compatible with 3G/4G bands used by Ukrainian mobile operators (Kyivstar, Vodafone, Lifecell).
Supported speeds:

• up to 64 Mbps with HSPA/HSPA+/DC-HSPA+

• up to 600 Mbps with 4G LTE

Recommended distance to the nearest tower — up to 30 km.

Design and Components

The antenna features a panel form factor, which ensures effective operation even without direct line of sight.

• Antenna size: 430 × 430 × 40 mm

• Housing: sealed, durable plastic

• Polarization: vertical / horizontal (MIMO support)

• Mounting: steel clamp for mast or pole — included

Mobile Guard Coaxial Cable

The kit includes two RG-58 50 Ohm coaxial cables, each 15 meters long, with F-connectors on both ends. These cables offer low signal loss and a secure connection.

• High flexibility and durability

• Reliable shielding

• Efficient signal transmission over long distances

F to CRC9 Adapters

Two F to CRC9 adapters allow easy connection of the antenna cables to 4G routers with CRC9 ports. Compatible with devices from Huawei, ERGO, Novatel MiFi, and others.

Installation Guide

1. Mount the antenna:
Install the antenna on the roof or side of the building, pointing it toward the nearest cell tower. Secure it using the included clamp.

2. Connect the cables:
Attach the F-connectors to the antenna, then run the cables toward your router.

3. Connect to the router:
Attach the F to CRC9 adapters to the cables and plug them into your router's CRC9 ports.

4. Align the antenna:
Turn on the router, access the web interface (usually at 192.168.8.1), and slowly adjust the antenna direction while monitoring the signal strength. Once the optimal direction is found, fix the antenna in place.

Usage

After installation and setup, you will benefit from:

• Stable 4G LTE internet connection

• Smooth Full HD / 4K video streaming

• Reliable video conferencing

• Internet access for work, study, and entertainment

This ready-to-use kit is the perfect solution for private homes, cottages, suburban offices, or rural locations with weak mobile signal coverage.