TENDA S105 is a compact network switch for connecting home and office equipment via Ethernet. Five RJ45 ports let you expand your wired network and connect computers, a TV, a network printer, a game console or IP cameras. The device operates automatically and is suitable for an apartment, a house, a small office or a dorm room.
Connect the cables — you’re ready to work
S105 operates on the Plug and Play principle. Connect the power adapter, connect one of the switch ports to a LAN port on your router, and connect your devices to the other ports. The switch will automatically detect the connections and start transmitting data.
There is no need to install drivers or carry out any initial configuration. This is convenient when you need to quickly add network ports near a desk, a TV or in another room.
Automatic negotiation with connected equipment
Each of the five ports supports 10/100 Mbps. The NWAY feature automatically negotiates the speed and operating mode with the connected device.
In full-duplex mode, a port can send and receive data simultaneously at up to 100 Mbps in each direction. Half-duplex mode is also supported for compatibility with network equipment that uses this mode.
Auto MDI/MDI-X automatically detects cable wiring. Both straight-through and crossover Ethernet cables can be used for connections.
Traffic processing and data transmission control
TENDA S105 uses the Store-and-Forward switching method: it first receives a frame in full, checks it and then forwards valid data. This helps filter out corrupted frames.
The switch automatically learns the MAC addresses of connected devices to direct data to the appropriate ports. The address table updates itself, and outdated entries are removed automatically.
Support for IEEE 802.3x Flow Control helps coordinate data flow between devices during intensive data exchange. The S105 has a switching capacity of 1 Gbps.
For computers, TVs and network devices
Equipment with an Ethernet port can be connected to TENDA S105:
-
Computers and laptops — for work, study and access to local resources.
-
Smart TVs and game consoles — for a wired connection to the home network.
-
Network printers and NAS devices — for shared access to printing and files.
-
IP cameras — for transmitting video data over the network.
The switch can be conveniently installed near a group of devices, with a single network cable running to it from the router.
Compact enclosure and quiet cooling
TENDA S105 takes up little space on a desk or shelf. Support for wall mounting lets you secure it near the network cables and free up your work surface.
Passive cooling ensures quiet operation, making it convenient to place the switch near a workspace or in a living area. Its low power consumption is well suited to the daily operation of a home or office network.
A separate indicator shows that power is on, while Link/Act indicators for each port help you check connections and data transmission activity.
Technical specifications
| Specification |
Value |
| Device type |
Unmanaged network switch |
| Number of ports |
5 × RJ45 |
| Port speeds |
10/100 Mbps |
| Network standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Speed and duplex auto-negotiation |
NWAY |
| Automatic cable wiring detection |
Auto MDI/MDI-X |
| Port operating modes |
Full-duplex and half-duplex |
| Switching method |
Store-and-Forward |
| Switching capacity |
1 Gbps |
| MAC address handling |
Automatic learning and removal of outdated entries |
| Indicators |
Power, port connection and activity |
| Installation |
Desktop or wall mounting |
| Cooling |
Passive |
| Power supply |
External adapter |
Package contents
-
TENDA S105 switch.
-
Power adapter.
-
Quick setup guide.