4G MIMO Panel Antenna Kit 2×24 dBi 1700–2700 MHz with Mobile Guard 50 Ohm Cable and SMA Adapter

This kit provides stable and high-speed 4G LTE internet access even in remote locations. It includes a powerful 2×24 dBi MIMO panel antenna, two Mobile Guard RG-58 50 Ohm coaxial cables (15 meters each) with pre-installed F-connectors on both ends, and two F to SMA adapters for connecting to a 4G router.

Performance and Compatibility

The MIMO panel antenna is designed to boost signal in 3G, 4G, and 4.5G networks.
With a high gain of 2×24 dBi, it operates in the 1700–2700 MHz frequency range, making it suitable for stable internet access even far from the nearest cell tower.

The antenna is fully compatible with 3G/4G frequencies used by Ukrainian mobile operators (Kyivstar, Vodafone, Lifecell).
Supported data speeds:

• up to 64 Mbps (HSPA/HSPA+/DC-HSPA+)

• up to 600 Mbps (4G LTE)

Recommended distance to the nearest tower — up to 30 km.

Design and Components

The antenna uses a panel form factor, providing reliable performance even without direct line of sight.

• Antenna dimensions: 430 × 430 × 40 mm

• Housing: weatherproof, durable plastic

• Polarization: vertical / horizontal (MIMO support)

• Mounting: steel clamp for mast or pole — included

Mobile Guard Coaxial Cable

The kit includes two RG-58 50 Ohm coaxial cables, each 15 meters long, with F-connectors on both ends. These cables ensure low signal loss and a secure, reliable connection.

• High flexibility and durability

• Proper shielding

• Effective signal transmission over long distances

F to SMA Adapters

Two F to SMA adapters allow easy connection of the antenna cables to a 4G router with SMA connectors. Compatible with most professional-grade routers and modems that use SMA ports, including devices from Teltonika, MikroTik, Huawei, Sierra Wireless, and more.

Installation Guide

1. Mount the antenna:
Install the antenna on the roof or building facade, aiming it toward the nearest base station. Secure it using the included mounting clamp.

2. Connect the cables:
Attach the F-connectors to the antenna, then route the cables to the router location.

3. Connect to the router:
Attach the F to SMA adapters to the other ends of the cables, then connect them to the router’s antenna ports.

4. Align the antenna:
Turn on the router and access the web interface (usually at 192.168.8.1). Slowly adjust the antenna direction while monitoring the signal strength. Once you achieve the optimal signal level, fully secure the antenna.

Usage

After installation and setup, you will benefit from:

• A stable 4G LTE internet connection

• Smooth Full HD / 4K video streaming

• Reliable video conferencing

• Internet access for work, study, and entertainment

This ready-to-use kit is the perfect solution for private homes, cottages, suburban offices, or rural areas with weak mobile signal coverage.